Diagnostic Aids
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 1997 GMC Yukon, 1997 GMC Suburban, 1997 GMC Pickup, 1997 GMC Cab & Chassis, and 1997 Chevrolet Tahoe. However, it is still accessible from the selected car via links, so may be relevant.
Inspect VCM connectors for backed-out terminals, improper mating, broken locks, improperly-formed or damaged terminals and poor terminal-to-wire connection. Inspect MAF sensor harness routing to ensure it is not too close to high-voltage wires such as spark plug leads. Inspect wiring harness for damage. If harness is okay, observe scan tool while wiggling MAF sensor related connectors and wiring harness. A change in display will indicate location of fault.