LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1996 >> Tahoe 2D Utility, 6.5 S >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 6.5L V8 Diesel - VIN [F & S] >> Removal & Installation >> Water Pump >> Installation

Water Pump: Installation

  1. Apply Anaerobic Sealant (1052357) to sealing surface of plate and water pump. Install plate to pump with NEW gasket. Coat water pump bolt threads with Sealant (1052080).
  2. Install pump and plate assembly to front cover with NEW gasket. Tighten bolts to specification. See TORQUE SPECIFICATIONS . To complete installation, reverse removal procedure.
scientia non olet · About LEMON Manuals