LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1996 >> Tahoe 2D Utility, 6.5 S >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 6.5L V8 Diesel - VIN [F & S] >> Removal & Installation >> Camshaft >> Removal

Removal & Installation: Camshaft: Removal

  1. Disconnect batteries. Drain cooling system. Remove alternator, grille, A/C compressor, condenser, radiator and power steering pump as necessary. Remove engine speed sensor.
  2. Remove hydraulic valve lifters. See HYDRAULIC VALVE LIFTERS . Remove timing chain and sprockets. See TIMING CHAIN & SPROCKETS.
  3. Remove long bolts from engine mounts. Raise and support engine to ease camshaft removal. Remove camshaft thrust plate and spacer. Remove camshaft.
scientia non olet · About LEMON Manuals