LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1996 >> Tahoe 2D Utility, 6.5 S >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 6.5L V8 Diesel - VIN [F & S] >> Engine Oiling >> Oil Pump >> Reassembly & Installation

Reassembly & Installation

  1. Install pump gears into pump body with marked gear teeth indexed. Reassemble remaining components in reverse order of disassembly.
  2. Install pump and extension shaft on engine, ensuring slot on top of extension shaft engages with drive tang on end of pump drive or vacuum pump. Tighten mounting bolt to specification. See TORQUE SPECIFICATIONS . Install oil pan.
scientia non olet · About LEMON Manuals