LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1996 >> Lumina Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Mechanical - 3.4L V6 - VIN [X]) >> Removal & Installation >> Engine Oil Cooler Assembly >> Removal

Engine Oil Cooler Assembly: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect negative battery cable. Drain cooling system. See COOLING SYSTEM DRAINING . Raise and support vehicle. Place drain pan below engine to catch any fluids. Disconnect oil pressure and crank sensor electrical connectors.
  2. Remove oil filter. Disconnect inlet and outlet hoses, and position hoses aside. Remove connector, oil cooler and adapter. See Figure.
scientia non olet · About LEMON Manuals