LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1996 >> Lumina Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Mechanical - 3.4L V6 - VIN [X]) >> Removal & Installation >> Camshaft Carrier & Covers >> Removal (Right Bank)

Removal (Right Bank)

WARNING: This page is about a different variant/trim than selected.
  1. Remove upper intake manifold. See INTAKE MANIFOLD (UPPER) . Remove right timing belt cover. Disconnect right spark plug wires. Disconnect breather hose from cover. Remove bolts and camshaft carrier cover. Remove cover gasket and "O" rings. Remove timing belt. See TIMING BELT & CAMSHAFT TIMING PROCEDURE .
  2. To retain lifters in carrier, install 6" long fuel line hose between camshaft and lifters (use 3/16" diameter hose for exhaust side, and 5/32" diameter hose for intake side). Remove bolts, camshaft carrier, and gasket.
scientia non olet · About LEMON Manuals