LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1996 >> Lumina Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Mechanical - 3.4L V6 - VIN [X]) >> Lubrication >> Oil Pump >> Reassembly & Installation

Reassembly & Installation

WARNING: This page is about a different variant/trim than selected.
  1. To reassemble, coat all components with engine oil. Reverse disassembly procedure using NEW pump cover gasket.
  2. Install drive shaft extension and oil pump, and engage shaft extension into drive gear. Install and tighten oil pump bolt to specification. See TORQUE SPECIFICATIONS . To complete installation, reverse removal procedure.
scientia non olet · About LEMON Manuals