Cylinder Head
WARNING: This page is about a different variant/trim than selected.
CYLINDER HEAD
| Application | Specification | ||||
|---|---|---|---|---|---|
| Deck Warpage (Maximum) | (1) .004" (.10 mm) | ||||
| Valve Seats | |||||
| Intake Valve | |||||
| Seat Angle | 46° | ||||
| Seat Width | .049-.059" (1.25-1.50 mm) | ||||
| Seat Runout (Maximum) | .0030" (.075 mm) | ||||
| Exhaust Valve | |||||
| Seat Angle | 46° | ||||
| Seat Width | .063-.075" (1.60-1.90 mm) | ||||
| Seat Runout (Maximum) | .0030" (.075 mm) | ||||
| Valve Guide Oil Clearance | |||||
| Intake Valve | .0011-.0026" (.028-.066 mm) | ||||
| Exhaust Valve | .0014-.0031" (.035-.078 mm) | ||||
| Exhaust Valve | .0018-.0033" (.046-.084 mm) | ||||
|
|||||