Engine Specifications: Camshaft
WARNING: This page is about a different variant/trim than selected.
CAMSHAFT
| Application |
In. (mm) |
| Bearing Inner Diameter |
2.1673-2.1683 (55.050-55.075) |
| Journal Diameter |
2.1643-2.1654 (54.973-55.001) |
| Lobe Lift |
.370 (9.40) |
| Oil Clearance (1991-93) |
.0015-.0035 (.037-.088) |
| Oil Clearance (1994-97) |
.0019-.0040 (.049-.102) |