Disc Brake Specifications

DISC BRAKE SPECIFICATIONS

Application

In. (mm)

Disc Diameter

11.200 (284.50)

Discard Thickness ⁽¹⁾

.956 (24.30)

Lateral Runout

.003 (.08)

Maximum Scoring ⁽²⁾

.060 (1.52)

Minimum Refinish Thickness

.972 (24.69)

Original Thickness

1.039 (26.39)

Parallelism

.0005 (.013)

⁽¹⁾	Use specification stamped on rotor (if available).

⁽²⁾	Manufacturer does not recommend resurfacing rotors when replacing brake pads. Resurface rotors only when there is a brake pulsation complaint or scoring greater than .060" (1.5 mm).