LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1996 >> Forward Control 6.5 F, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes - P Series Van >> Removal & Installation >> Power Brake Booster >> Removal & Installation

Removal & Installation

  1. Remove master cylinder. See MASTER CYLINDER under REMOVAL & INSTALLATION . Ensure no brake fluid contacts ABS control unit or related electrical connectors and wiring.
  2. Disconnect vacuum hose from booster. Disconnect booster push rod from brake pedal. Remove booster mounting nuts from inside vehicle. Remove booster and gasket.
  3. To install, reverse removal procedure. Bleed brake system if lines were disconnected from master cylinder. See MANUAL BLEEDING or PRESSURE BLEEDING under BLEEDING BRAKE SYSTEM .
scientia non olet · About LEMON Manuals