Brake Shoes &/Or Pads: Remove & Replace

Includes: Clean, lube and/or replace Brake Hardware as necessary. Adjust Brakes (where applicable). Includes: Repack Wheel Bearings (where applicable). DOES NOT include refinishing.

Applies To	Note	Standard Hours	Warranty Hours	Skill Level
All,Disc		1.8		B
All,Drum,Full Floating Axle		2.8		B
All,Drum,Semi-Floating Axle		2.2		B
Front		1.0	0.9	B
Rear,Drum,Full Floating Axle		2.0	1.7	B
Rear,Drum,Semi-Floating Axle		1.4	0.9	B
Combination Procedure: AXLE BEARING: Replace:
G10, Rear,Both		0.8		B
G10, Rear,One Side		0.6		B
Combination Procedure: AXLE SEAL: Replace: Semi-Floating Axle.
Rear,Both		0.8		B
Rear,One Side		0.6		B
Combination Procedure: BRAKE HOSE: Replace:
4-Wheel ABS, Each Additional		0.2		B
Combination Procedure: CALIPER: Overhaul:
G10,4-Wheel ABS, One,Front,Dual Piston	Includes: Bleed Brakes.	1.5		B
G10,4-Wheel ABS, One,Front,Single Piston	Includes: Bleed Brakes.	1.3		B
Combination Procedure: CALIPER: Replace:
4-Wheel ABS, One	Includes: Bleed Brakes.	1.1		B
Combination Procedure: DISC ROTOR: Burnish Brake Rotors While Driving Vehicle:
		0.5		B
Combination Procedure: DISC ROTOR: Remove and Install for Refinishing:
Each	Includes: Repack Wheel Bearings.	0.4		B
Combination Procedure: DISC ROTOR: Replace:
Non Separable,Each	Includes: Repack Wheel Bearings.	0.4		B
Separable,Each	Includes: Repack Wheel Bearings.	0.5		B
Combination Procedure: DRUM: Replace:
Separable,Inboard Mounted,10 Bolt,Each		0.5		B
Separable,Inboard Mounted,exc 10 Bolt,Each		0.3		B
Separable,Outboard Mounted,Each		0.1		B
Combination Procedure: WHEEL BEARING: Repack: Both Sides.
Front		0.8		B
Combination Procedure: WHEEL BEARING: Replace:
Front,One Side	Includes: Repack Wheel Bearings.	0.5		B
Combination Procedure: WHEEL CYLINDER: Overhaul:
4-Wheel ABS, One,Off Vehicle	Includes: Bleed Brakes.	1.3		B
4-Wheel ABS, One,On Vehicle	Includes: Bleed Brakes.	1.1		B
Combination Procedure: WHEEL CYLINDER: Replace:
4-Wheel ABS, One	Includes: Bleed Brakes.	1.1		B