LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1994 >> Suburban K2500, 5.7 K >> Repair and Diagnosis >> Suspension >> Front Suspension >> Suspension - Front Torsion Bar (4WD & AWD) >> Removal & Installation >> Upper Control Arm Bushings >> Bushing Replacement

Bushing Replacement

  1. Remove upper control arm from vehicle. See UPPER CONTROL ARM  . Place upper control arm in soft-jawed vise.
  2. Press bushings out of upper control arm.
    NOTE: Alignment angles are preset at factory. Knockouts MUST be removed before installation of alignment adjustment cams using Knockout Removal Tool (J-38794 ).
  3. To install NEW bushings into upper control arm, press NEW bushings into upper control arm. On all models, press in bushings until properly seated in upper control arm. Install upper control arm into vehicle. See UPPER CONTROL ARM  .
scientia non olet · About LEMON Manuals