LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1994 >> Suburban K2500, 5.7 K >> Repair and Diagnosis >> Suspension >> Front Suspension >> Suspension - Front Torsion Bar (4WD & AWD) >> Removal & Installation >> Stabilizer Bar >> Removal

Stabilizer Bar: Removal

  1. Raise and support vehicle. Remove wheel and tire assembly. Remove stabilizer bar-to-frame bolts, nuts and clamps.
  2. Remove stabilizer bar-to-lower control arm bolt, nut and spacer. Remove stabilizer bar from vehicle. Remove stabilizer bar bushings.
  3. Inspect bushings for deformation and deterioration. Check stabilizer bar and clamps for excessive wear and damage. Replace as necessary.