Wheel Cylinder: Remove & Replace
WARNING: This page is about the Suburban C1500, which is a different variant/trim than selected.
Includes: Repack Wheel Bearings (where applicable), bleed System and replace Shoes (if necessary).| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| Rear,Full Floating Axle,Both | 3.4 | 1.8 | B | |
| Rear,Full Floating Axle,One Side | 2.3 | 1.0 | B | |
| Rear,Semi-Floating Axle,Both | 2.8 | 1.1 | B | |
| Rear,Semi-Floating Axle,One Side | 2.0 | 0.8 | B | |
| Combination Procedure: OIL SEAL WEAR SLEEVE: Replace: | ||||
| Both | 0.8 | B | ||
| One | 0.6 | B | ||