LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1992 >> Hi-Cube 7.4 N >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Suspension - Rear - G Series >> Removal & Installation >> Shock Absorber >> Removal

Shock Absorber: Removal

  1. Raise the vehicle on a hoist.
  2. Remove nut (16).
  3. Remove spring washer (15).
  4. Remove washer (3) and bolt (38).
  5. Disconnect shock absorber from the frame.
  6. Remove nut (11), spring washer (12) and bolt (14).
  7. Disconnect shock absorber (13) from the axle.
scientia non olet · About LEMON Manuals