Brake Rotor - Revised Thickness Specifications

Number: 93-106-5

Section: 5

Date: FEB. 1993

Corporate Bulletin No.: 335002

ASE No.: A5

Subject:
BRAKE ROTOR SPECIFICATIONS

Model and Year:
1991-93 CAVALIER, CORSICA AND BERETTA

SERVICE UPDATE

This bulletin is an update to Section 5, brake rotor specifications for the "J" and "L" series. Only the corrections are listed below for the 1991-93 service manuals.

1992 All "J", "L" Minimum thickness after refinish should be 19.08 mm (.751).

1993 All "J", "L" Maximum thickness should be 20.48 mm (.806).