Pistons, Pins & Rings Specifications
PISTONS, PINS & RINGS SPECIFICATIONS
| Application | In. (mm) | ||
|---|---|---|---|
| Piston | |||
| Clearance | .0007-.0021 (.018-.053) | ||
| Pins | |||
| Diameter | .9270-.9271 (23.546-23.548) | ||
| Piston Fit | .0003-.0010 (.076-.025) | ||
| Rod Fit | .0008-.0016 (.020-.041) | ||
| Rings | |||
| No. 1 | |||
| End Gap | .010-.020 (.25-.51) | ||
| Side Clearance | .0012-.0032 (.030-.081) | ||
| No. 2 | |||
| End Gap | .018-.026 (.46-.66) | ||
| Side Clearance | .0012-.0032 (.030-.081) | ||
| No. 3 (Oil) | |||
| End Gap | .015-.055 (.38-1.40) | ||
| Side Clearance | .002-.007 (.05-.20) | ||