LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1992 >> Blazer Standard >> Repair and Diagnosis >> Suspension >> Rear Suspension >> SUSPENSION - REAR - C & K Series >> Removal & Installation >> Shock Absorber >> Removal

Shock Absorber: Removal

  1. Raise vehicle on a hoist.
  2. Remove the upper shock nut (1) and the bolt (2) from the frame bracket. See Fig 1.
  3. Remove the lower shock nut (3), the washer (4), and the bolt (5) from the axle bracket. See Fig 1.
  4. Remove the shock absorber (6) from the vehicle. See Fig 1.
Fig 1: Removing/Installing Rear Shock Absorber
G00138016Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals