LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1990 >> Step Van 7.4 N, Standard >> Repair and Diagnosis >> Suspension >> Front Suspension >> Suspension - Front (2WD Coil Spring) >> Removal & Installation >> Wheel Bearings >> Installation

Wheel Bearings: Installation

  1. To install, reverse removal procedure. Install outer race using Race Installers (J-8457 ) and (J-8449 ) for inner bearing race. Pack bearings with proper lubricant.
  2. Install grease seal until seal is even with hub surface. Lubricate seal lip and hub cavity with wheel bearing grease. To complete installation, reverse removal procedure. Adjust wheel bearings. See FRONT WHEEL BEARINGS under ADJUSTMENTS in this article.
scientia non olet · About LEMON Manuals