LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1990 >> Step Van 7.4 N, Standard >> Repair and Diagnosis >> Suspension >> Front Suspension >> Suspension - Front (2WD Coil Spring) >> Removal & Installation >> Upper Control Arm Bushings >> Bushing Replacement (R10/1500, G10/1500 & G20/2500)

Bushing Replacement (R10/1500, G10/1500 & G20/2500)

  1. Mount control arm assembly in a vise. Remove nuts from ends of control arm shaft. Using components from Control Arm Bushing Service Set (J-24435-A ), remove bushing from control arm.
  2. Remove shaft from control arm. Note direction of shaft installation. Repeat procedure to remove remaining bushing. To install, reverse removal procedure. Ensure bushings are fully seated.
scientia non olet · About LEMON Manuals