Torque Specifications
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 1990 GMC Suburban, 1990 GMC Pickup, 1990 GMC Jimmy, 1990 GMC Cab & Chassis, and 1990 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Application |
Ft. Lbs. (N.m) |
| Anchor Plate-to-Steering Knuckle Nut |
65 (88) |
| Ball Joint |
| Lower Ball Joint Stud Nut |
70 (95) |
| Upper Ball Joint Stud Nut |
100 (136) |
| Adjusting Ring-to-Spindle |
50 (68) |
| Kingpin Cap Bolt |
80 (108) |
| Kingpin-to-Steering Knuckle |
550 (746) |
| Leaf Spring |
| Axle "U" Bolt |
150 (203) |
| Shackle Nut |
90 (122) |
| Shackle-to-Frame Nut |
50 (68) |
| Stabilizer Bar-to-Frame Bracket Bolt |
| V30/3500 |
52 (71) |
| All Other Models |
70 (95) |
| Stabilizer Bar-to-Spring Plate Bolt |
133 (180) |
| Steering Arm-to-Steering Knuckle Nut |
90 (122) |
| Tie Rod End Stud Nut |
40 (54) |