Bushing Replacement
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 1990 GMC Suburban, 1990 GMC Pickup, 1990 GMC Jimmy, 1990 GMC Cab & Chassis, and 1990 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.
Place spring leaf on hydraulic press and press out bushing using proper sized rod, pipe or remover tool. Press in new bushing using proper sized rod, pipe or installer tool. Ensure installer tool presses on steel outer shell of bushing. Install bushing until it protrudes an equal amount on each side of spring.