LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1990 >> Step Van 7.4 N, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (SUSPENSION - FRONT ( C Series 2WD)) >> Torque Specifications

Torque Specifications

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 1990 GMC S15 Pickup, 1990 GMC S15 Jimmy, 1990 GMC Pickup, 1990 GMC Cab & Chassis, and 1990 Chevrolet S10 Pickup. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS

Application Ft. Lbs. (N.m)
Ball Joint-To-Control Arm Bolt
"C" Series Model 35 52 (71)
All Others 17 (23)
Brake Rotor Splash Shield Mounting Bolt 10 (14)
Bumper Mounting Bolt 20 (27)
Lower Ball Joint Stud Nut
"C" Series 90 (122)
"S" Series 83 (113)
Lower Control Arm-To-Frame Pivot Bolt
"C" Series (1) 96 (130)
"S" Series
Front Bolt (1) 94 (127)
Rear Bolt (1) 66 (90)
Shock Absorber
To-Lower Control Arm Mounting Bolt 20 (27)
Upper Mounting Nut (2)
Stabilizer Bar
Insulator Bracket-To-Frame Mounting Bolt (3) 24 (33)
Link Mounting Bolt 13 (18)
Tie Rod End Stud Nut 40 (54)
Upper Ball Joint Stud Nut
"C" Series 90 (122)
"S" Series 61 (83)
Upper Control Arm
To-Frame Mounting Bolt
"C" Series 88 (119)
"S" Series 65 (88)
Pivot Mounting Nut 85 (115)
Wheel Lug Nut
"C" Series
Dual Wheels 125 (170)
Single Wheels 105 (142)
"S" Series 90 (122)
(1) Tighten pivot bolts and nuts with weight of vehicle on its wheels.
(2) Tighten to 96 INCH lbs. (10.8 N.m).
(3) Nut must be at least even with bottom of bolt after tightening to specification.