Wheel Bearings: Installation
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 1990 GMC S15 Pickup, 1990 GMC S15 Jimmy, 1990 GMC Pickup, 1990 GMC Cab & Chassis, and 1990 Chevrolet S10 Pickup. However, it is still accessible from the selected car via links, so may be relevant.
- If bearing races were removed, drive bearing races into position using hammer and brass drift. Lubricate bearings thoroughly.
- To complete installation, reverse removal procedure. Adjust wheel bearings. See FRONT WHEEL BEARINGS under ADJUSTMENTS in this article.