Lower Control Arm & Pivot Bushings: Installation
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 1990 GMC S15 Pickup, 1990 GMC S15 Jimmy, 1990 GMC Pickup, 1990 GMC Cab & Chassis, and 1990 Chevrolet S10 Pickup. However, it is still accessible from the selected car via links, so may be relevant.
To install, reverse removal procedure using NEW nuts on control arm bolts. Control arm bolts must be installed with the bolt head toward front of vehicle. Tighten bolts to specification with weight of vehicle on its wheels. Check wheel alignment.