LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1990 >> Step Van 7.4 N, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (SUSPENSION - FRONT ( R Series 2WD)) >> Removal & Installation >> Wheel Bearings >> Installation

Wheel Bearings: Installation

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 1990 GMC Suburban, 1990 GMC Pickup, 1990 GMC Cab & Chassis, 1990 Chevrolet Suburban, and 1990 Chevrolet Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse removal procedure. Install outer race using Race Installers (J-8457 ) and (J-8449 ) for inner bearing race. Pack bearings with proper lubricant.
  2. Install grease seal until seal is even with hub surface. Lubricate seal lip and hub cavity with wheel bearing grease. To complete installation, reverse removal procedure. Adjust wheel bearings. See FRONT WHEEL BEARINGS  under ADJUSTMENTS in this article.
scientia non olet · About LEMON Manuals