LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1990 >> Step Van 7.4 N, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (SUSPENSION - FRONT ( R Series 2WD)) >> Removal & Installation >> Upper Control Arm Bushings >> Bushing Replacement (R10/1500, G10/1500 & G20/2500)

Bushing Replacement (R10/1500, G10/1500 & G20/2500)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 1990 GMC Suburban, 1990 GMC Pickup, 1990 GMC Cab & Chassis, 1990 Chevrolet Suburban, and 1990 Chevrolet Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Mount control arm assembly in a vise. Remove nuts from ends of control arm shaft. Using components from Control Arm Bushing Service Set (J-24435-A ), remove bushing from control arm.
  2. Remove shaft from control arm. Note direction of shaft installation. Repeat procedure to remove remaining bushing. To install, reverse removal procedure. Ensure bushings are fully seated.
scientia non olet · About LEMON Manuals