Steering Knuckle: Installation
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 1990 GMC Suburban, 1990 GMC Pickup, 1990 GMC Cab & Chassis, 1990 Chevrolet Suburban, and 1990 Chevrolet Pickup. However, it is still accessible from the selected car via links, so may be relevant.
To install, reverse removal procedure. Tighten nuts to specification. See TORQUE SPECIFICATIONS table at the end of this article. Tighten ball joint and tie rod end stud nut to align cotter pin holes as necessary. Adjust wheel bearings. See FRONT WHEEL BEARINGS under ADJUSTMENTS in this article.