LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1990 >> Step Van 7.4 N, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Disc Brake System & Drum Brake System) >> Adjustments >> Parking Brake Control Rod >> "P" Series Motorhome

"P" Series Motorhome

WARNING: This page does not describe the selected car, but rather 35 other vehicles, including the 1992 Pontiac Trans Sport, 1992 Oldsmobile Silhouette, 1992 Oldsmobile Bravada, 1992 GMC Yukon, and 1992 GMC Vandura Special. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect parking brake control rod from control valve lever and transmission control equalizer. See Fig 1. Place control valve lever in park position. Place transmission selector in Park.
  2. Connect parking brake control rod to control valve lever. Loosen parking brake control rod jam nuts. Rotate rod as necessary to align hole at end of rod with hole in transmission control equalizer lever. Install and tighten bolt.
Fig 1: Adjusting Automatic Parking Brake Control Rod ("P" Series Motorhome)
G91D13758Courtesy of GENERAL MOTORS CORP.