"M" Series: Installation
WARNING: This page does not describe the selected car, but rather 28 other vehicles, including the 1989 GMC Vandura Special, 1989 GMC Vandura, 1989 GMC Value Van, 1989 GMC Suburban, and 1989 GMC Safari. However, it is still accessible from the selected car via links, so may be relevant.
- Apply a light coat of high-temperature grease to main drive gear splines. Reverse removal procedures to complete installation.
- Braces must be installed with long holes at the transmission end. Tighten braces at clutch housing first then at transmission. Tighten bolts to specification. See TORQUE SPECIFICATIONS ("M" SERIES) .