Transfer Case Removal & Installation: NP-205: Removal
WARNING: This page does not describe the selected car, but rather 28 other vehicles, including the 1987 GMC Vandura Special, 1987 GMC Vandura, 1987 GMC Value Van, 1987 GMC Suburban, and 1987 GMC Safari. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support vehicle on hoist. Drain transfer case. Disconnect speedometer cable. Remove skid plate and crossmember supports. Disconnect drive shafts from transfer case.
- On A/T equipped models, remove engine strut rod. Disconnect shift lever rod from shift rail link. Support transfer case and remove transfer case-to-transmission adapter bolts. Move transfer case to rear until input shaft clears adapter. Remove assembly from vehicle.