LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1990 >> Step Van 7.4 N, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Servicing - M/T) >> Adjustments >> Shift Linkage >> All With Column Shifter

All With Column Shifter

WARNING: This page does not describe the selected car, but rather 26 other vehicles, including the 1984 GMC Vandura Special, 1984 GMC Vandura, 1984 GMC Value Van, 1984 GMC Suburban, and 1984 GMC S15 Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove shift rods from transmission. Place First and Reverse gear selector lever on transmission in Reverse position. Move second and third transmission shift lever to forward detent, then back one.
  2. Place column shifter in Reverse position. Turn ignition switch to "LOCK" position. Turn ignition switch to "LOCK" position. Move column shifter to Neutral position and put a 1/4" gauge pin through holes in shift levers at base of steering column.
  3. Loosen slide swivel on First and Reverse rod and place in First and Reverse transmission shift lever. Hold tightly in place and tighten swivel adjusting bolt. Install Second and Third shift rod.
  4. Unlock steering wheel and remove gauge pin. Lubricate all rod and swivel connections.
scientia non olet · About LEMON Manuals