Stabilizer Bar: Removal
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 1992 Oldsmobile Bravada, 1992 GMC Yukon, 1992 GMC Suburban, 1992 GMC Sonoma, and 1992 GMC Safari. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support vehicle. Remove wheel and tire assembly. Remove stabilizer bar-to-frame bolts, nuts and clamps. On Bravada, Jimmy, Sonoma, Syclone, Typhoon and "T" Series Blazer & Pickup, remove stabilizer bar-to-lower control arm bolts, nuts and clamps.
- On Astro, "K" Series Blazer & Pickup, Safari, Sierra, Suburban and Yukon, remove stabilizer bar-to-lower control arm bolt, nut and spacer. Remove stabilizer bar from vehicle. Remove stabilizer bar bushings.
- Inspect bushings for deformation and deterioration. Check stabilizer bar and clamps for excessive wear and damage. Replace as necessary.