LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1990 >> Step Van 7.4 N, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Drive Axle - 7.5", 7.625", 8.5" & 9.5") >> Overhaul >> Reassembly & Adjustments >> Case Assembly

Case Assembly

WARNING: This page does not describe the selected car, but rather 20 other vehicles, including the 1990 GMC Vandura Special, 1990 GMC Vandura, 1990 GMC Safari, 1990 GMC S15 Pickup, and 1990 GMC S15 Jimmy. However, it is still accessible from the selected car via links, so may be relevant.

Install ring gear squarely onto case. Tighten ring gear bolts evenly and alternately to specification. Install side gears, differential pinions and thrust washers into case. Install differential pinion shaft and lock screw. Tighten lock screw to specification. See TORQUE SPECIFICATIONS  table in this article.

scientia non olet · About LEMON Manuals