Accumulator Leak-Down Test
WARNING: This page does not describe the selected car, but rather 26 other vehicles, including the 1992 GMC Yukon, 1992 GMC Vandura Special, 1992 GMC Vandura, 1992 GMC Value Van, and 1992 GMC Suburban. However, it is still accessible from the selected car via links, so may be relevant.
- Start engine. Charge accumulator by applying brakes or turning steering wheel from stop-to-stop. Turn engine off. Allow vehicle to sit for one hour. Apply and release brake pedal. There should be at least 2 power-assisted applications. This indicates the accumulator is retaining a charge.
- If accumulator does not retain charge for one hour but functions normally immediately after charging, replace accumulator valve. If accumulator can be heard charging and discharging but does not hold a charge, replace accumulator valve. See OVERHAUL .
- Discharge accumulator by pressing brake pedal several times. Attempt to rotate accumulator can in respect to housing. If it is possible to rotate can, accumulator has lost its gas charge. Replace accumulator assembly.