Cleaning & Inspection
WARNING: This page does not describe the selected car, but rather 26 other vehicles, including the 1992 GMC Yukon, 1992 GMC Vandura Special, 1992 GMC Vandura, 1992 GMC Value Van, and 1992 GMC Suburban. However, it is still accessible from the selected car via links, so may be relevant.
- Clean all parts with power steering fluid. DO NOT use any other cleaner. If any accumulator valve components are damaged or lost, replace all valve components.
- Inspect tube seats from burrs or nicks. If damaged, remove tube seat using a No. 4 bolt extractor. Install tube seat using hammer and Tube Seat Installer (J-6217). See Fig 1.