Electro-Hydraulic Control Unit (EHCU): Installation
WARNING: This page does not describe the selected car, but rather 58 other vehicles, including the 1992 Oldsmobile Bravada, 1992 GMC Yukon, 1992 GMC Suburban, 1992 GMC Sonoma, and 1992 GMC Safari. However, it is still accessible from the selected car via links, so may be relevant.
- To install, reverse removal procedure. Align all index marks for steering components. Ensure intermediate steering shaft pinch bolts pass through shaft undercut.
- Bleed brake system, including EHCU. See BLEEDING BRAKE SYSTEM . DO NOT overtighten EHCU-to-bracket bolts during installation. This may cause excessive noise transfer into vehicle. See TORQUE SPECIFICATIONS table.