Torque Specifications
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 1990 GMC S15 Pickup, 1990 GMC S15 Jimmy, 1990 GMC Pickup, 1990 GMC Cab & Chassis, and 1990 Chevrolet S10 Pickup. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Application |
Ft. Lbs. (N.m) |
| "K" Series |
| Ball Joint-to-Control Arm Nuts |
| 1/2 & 3/4 Ton |
17 (23) |
| 1 Ton |
52 (71) |
| Ball Joint Stud Nuts |
94 (127) |
| Brake Caliper Mount Bolt |
37 (50) |
| Drive Axle-to-Hub & Bearing Nut |
173 (235) |
| Hub & Bearing/Shield & Knuckle Bolts |
66 (90) |
| Lower Control Arm-to-Frame Nuts |
96 (130) |
| Lug Nut |
| Single Wheel |
105 (142) |
| Dual Wheel |
125 (170) |
| Retainer-to-Torsion Bar Support Bolts |
35 (47) |
| Shock Absorber Nut |
48 (65) |
| Stabilizer Bar Clamp-to-Frame Bolts |
12 (16) |
| Stabilizer Bar Link Bolt |
24 (33) |
| Tie Rod End-to-Steering Knuckle Nut |
35 (47) |
| Torsion Bar Retainer Nut |
33 (45) |
| Upper Control Arm-to-Frame Nuts |
88 (119) |
| "T" Series |
| Ball Joint-to-Control Arm Nuts |
17 (23) |
| Ball Joint Stud Nuts |
| Lower |
83 (113) |
| Upper |
61 (83) |
| Brake Caliper Mount Bolt |
37 (50) |
| Drive Axle Nut-to-Hub & Bearing |
181 (245) |
| Hub & Bearing/Shield & Knuckle Nuts |
86 (116) |
| Lower Control Arm-to-Frame Bolts |
148 (201) |
| Lower Control Arm-to-Frame Nuts |
92 (125) |
| Lug Nut |
| Aluminum Wheel |
90 (122) |
| Steel Wheel |
73 (99) |
| Retainer-to-Torsion Bar Support Bolts |
26 (35) |
| Shock Absorber Nut |
54 (73) |
| Stabilizer Bar Link Bolt |
24 (33) |
| Stabilizer Bar Clamp-to-Frame Bolts |
35 (47) |
| Tie Rod End-to-Steering Knuckle Nut |
35 (47) |
| Torsion Bar Retainer Bolt |
25 (34) |
| Upper Control Arm-to-Frame Nuts |
70 (95) |