Stabilizer Bar: Removal
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 1990 GMC S15 Pickup, 1990 GMC S15 Jimmy, 1990 GMC Pickup, 1990 GMC Cab & Chassis, and 1990 Chevrolet S10 Pickup. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support vehicle. Remove both wheel and tire assemblies. Unload torsion bar. See Figure . Detach stabilizer bar frame bracket mounting bolts. Detach bar-to-lower control arm bracket mounting bolts.
- Remove stabilizer bar with brackets and rubber insulator bushings. Inspect bushings for deformation and/or deterioration. Check stabilizer bar and brackets for excessive wear or damage and replace as necessary.