LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1990 >> Step Van 7.4 N, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Suspension - Front (4WD) - Torsion Bar) >> Removal & Installation >> Lower Control Arm Bushings ("T" Series) >> Removal

Lower Control Arm Bushings ("T" Series): Removal

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 1990 GMC S15 Pickup, 1990 GMC S15 Jimmy, 1990 GMC Pickup, 1990 GMC Cab & Chassis, and 1990 Chevrolet S10 Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support vehicle. Remove wheels. Unload torsion bar tension. See Figure .
  2. Remove stabilizer bar from vehicle. See STABILIZER BAR  in this article. Disconnect lower shock absorber bolt. Remove lower control arm pivot bolts and nuts.