LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1990 >> Step Van 7.4 N, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 7.4L V8 - VIN [N] >> Removal & Installation >> Engine Front Cover >> Installation

Engine Front Cover: Installation

  1. Install gasket on front cover with gasket sealer. Install cover and timing tab (if equipped) on engine block. Tighten bolts to specification. See appropriate TORQUE SPECIFICATIONS table. Install vibration damper using damper puller/installer.
  2. Before installing vibration damper retaining bolt, apply small amount of RTV sealant at crankshaft Woodruff key and vibration damper. Install retaining bolt. Tighten to specification. Reverse removal procedure to install remaining components. Tighten bolts to specification. See TORQUE SPECIFICATIONS  table.
scientia non olet · About LEMON Manuals