LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1990 >> Step Van 7.4 N, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 5.7L V8 - VIN [K] >> Removal & Installation >> Front Cover Oil Seal >> Installation

Front Cover Oil Seal: Installation

  1. Using Seal Installer (J-35468), install new seal in front cover. Seal lip must face toward engine. Coat seal lip with engine oil. Install vibration damper.
  2. Before installing vibration damper retaining bolt, apply small amount of RTV sealant at crankshaft Woodruff key and vibration damper. Install retaining bolt and tighten to specification. Reverse removal procedure to install remaining components. Tighten all bolts to specification. See TORQUE SPECIFICATIONS  table.
scientia non olet · About LEMON Manuals