LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1990 >> Step Van 7.4 N, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 5.7L V8 - VIN [K] >> Adjustments >> Valve Clearance Adjustment

Valve Clearance Adjustment

  1. Rotate engine until No. 1 piston is on TDC of compression stroke. With piston in this position, adjust valves listed in the VALVE CLEARANCE ADJUSTMENT table.
  2. Loosen rocker arm adjusting nut until lash is present. Tighten adjusting nut until lash is removed and push rod will not rotate. When lash is removed, tighten adjusting nut one full turn.
  3. Rotate crankshaft 360 degrees to bring No. 6 piston to TDC. Adjust remaining valves. See VALVE CLEARANCE ADJUSTMENT table.
VALVE CLEARANCE ADJUSTMENT

Piston on TDC Adjust - Intake Adjust - Exhaust
No. 1 No. 1, 2, 5 & 7 No. 1, 3, 4 & 8
No. 6 No. 3, 4, 6 & 8 No. 2, 5, 6 & 7
scientia non olet · About LEMON Manuals