LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1990 >> Step Van 7.4 N, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 5.0L V8 - VIN [H] >> Engine Specifications >> Cylinder Block Specifications

Cylinder Block Specifications

CYLINDER BLOCK SPECIFICATIONS

Application In. (mm)
Cylinder Bore
Diameter 3.7350-3.7385 (94.869-94.957)
Maximum Taper (1) .0005 (.012)
Maximum Out-of-Round (2) .001 (.03)
(1) Specification is for thrust side. Relief side is .001" (.03 mm).
(2) Production specification is given. Maximum service specification is .002" (.05 mm).
scientia non olet · About LEMON Manuals