LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1990 >> Step Van 7.4 N, Standard >> Repair and Diagnosis >> Electrical >> Gauges >> Instrument Panel - Standard & Electronic >> Testing >> Elect. I/C Testing (S & T Series) >> Cluster Display Does Not Light

Cluster Display Does Not Light

  1. Check for ignition power to cluster and for an inoperative cluster. Disconnect large 34-pin connector from cluster. Using a DVOM, measure voltage from connector pin terminals A15 to pin B7 with ignition on.
  2. If DVOM reads less than battery voltage or zero, repair Pink/White wire from ignition. If ignition power circuit is okay, replace inoperative instrument cluster.