LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1990 >> Step Van 7.4 N, Standard >> Repair and Diagnosis >> Electrical >> Gauges >> Instrument Panel - Standard & Electronic >> Testing >> Elect. I/C Testing & Operation- (Astro & Safari) >> Cluster Display Does Not Switch Between Total & Trip Odometer

Cluster Display Does Not Switch Between Total & Trip Odometer

  1. Check for inoperative cluster control switch or wiring. Disconnect large 17-pin connector from cluster. Using an ohmmeter, measure resistance between cluster connector pin A3 and ground. See Figure.
  2. Resistance should be zero in one position and open in the other. If switch does not respond as indicated, repair Light Green wire between cluster and switch, or replace switch, or repair Black wire from switch to ground.
  3. If switch and related wiring are okay, replace inoperative instrument cluster.
scientia non olet · About LEMON Manuals