LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1990 >> Step Van 7.4 N, Standard >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> Engine Oil Pan Removal >> Removal & Installation >> Oil Pan >> Removal (2WD)

Removal (2WD)

  1. Disconnect negative battery cable. Drain engine oil and cooling system. Remove engine (On all but "M" Series). Remove oil pan attaching hardware. Remove oil pan. Clean all gasket mating surfaces and straighten sealing flange.
  2. When installing, apply thin coat of RTV sealer to entire oil pan sealing flange. Align holes of gasket on block and install oil pan.
scientia non olet · About LEMON Manuals