Removal (All Models Except Van)
- Disconnect batteries. Drain cooling system. Remove alternator, grille, A/C compressor and condenser, radiator and power steering (if necessary). Remove vacuum pump (if equipped).
- Remove intake manifold, valve covers and rocker arm shaft assembly as previously described. Remove push rods. Ensure components are marked for reassembly reference.
- Remove engine front cover, timing chain, lifters, guide plates and clamps as previously described. Mark components location for reassembly reference. Remove front engine mount through bolts. Raise engine to ease camshaft removal. Block engine. Remove camshaft thrust plate and spacer (if equipped). Remove camshaft.