LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1990 >> Step Van 7.4 N, Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Steering Column Switches >> Turn Signals & Hazard Flashers >> Removal & Installation >> Steering Wheel

Steering Wheel

  1. Remove horn button. On vehicles with sport steering wheel, remove bushing, receiver and flex plate from steering wheel. On all models, remove steering wheel retaining nut.
  2. Place reference mark on steering wheel and shaft for reassembly reference. Using steering wheel puller, remove steering wheel. To install, reverse removal procedure. Align marks made during removal. Tighten steering wheel nut to 25 ft. lbs. (34 N.m).
  3. Replace negative battery cable, reset clock and radio stations if applicable. Check horn, and turn signal for correct operation.
scientia non olet · About LEMON Manuals